New homes in Ras Al Khaimah arrive with serious glass. The recent phases of Mina Al Arab and the newer Al Hamra villas are glazed with sealed double-glazed units — chosen for exactly the heat and coastal air this emirate serves up — and their owners tend to assume that a pet door is therefore impossible. The assumption is wrong, but the reason behind it is real: you cannot cut a hole in a finished double-glazed unit. A double glazed pet door Ras Al Khaimah new homes are fitted with is not cut into the existing glass at all; it is a new unit, made for the opening with the flap already in it. Our double-glazed pet doors in Ras Al Khaimah are fitted on the scheduled weekly route, and this guide explains how the replacement works.
Why your existing unit can’t simply be cut
A double-glazed unit is two panes of tempered safety glass sealed around a spacer, and tempered glass has a defining property: once it has been tempered, it cannot be cut, drilled or trimmed. Attempt it and the pane does not crack politely — it disintegrates into granules, and the sealed unit is destroyed with it.
That is not a limitation of the fitter; it is the physics of safety glass, and it is why any installer who offers to cut your existing unit on site should be shown the door. The hole for a flap has to be formed in the glass before tempering, in the factory, and the unit then sealed around it. Everything about a proper double-glazed pet door follows from that one fact.
The replacement unit: measured, made, sealed
The process is methodical. You send photographs of the door or panel on WhatsApp, and we confirm that a replacement unit is the right route. On the scheduled measurement visit, the opening is laser-measured — width, height, unit thickness and frame profile — because new-build glazing varies between developers and phases, and a sealed unit must be made to the millimetre.
Your new unit is then fabricated: glass cut to size, the flap opening formed, the glass tempered, the flap fitted, and the unit sealed as one piece. On the fitting visit, the original unit comes out and the new one goes in. Your original double-glazed panel is stored safely, not skipped — so if you ever move or change your mind, it swaps back in about 30 minutes and the door is a standard door again.
At that same fitting visit we set the flap at the right height for your pet, check the new unit’s seals against the frame, and run your cat or dog through the door a few times so the first solo trip is not a surprise. In waterfront homes we also look at the condition of the frame and track while the unit is out, because a sealed unit deserves a sound opening around it — and it is far easier to see with the glass removed.

Double Glazed Pet Door Ras Al Khaimah: Reflective Glass and Shade Matching
New-build waterfront glass is often reflective or tinted, specified by the developer for privacy and solar control. Owners reasonably want the replacement unit to match the panels either side of it, and this is where honesty matters more than salesmanship.
We offer the closest matching glass options available, but an exact shade match for reflective glass cannot be guaranteed 100%. Developers sourced their reflective coatings from different suppliers and batches, and coatings weather at slightly different rates, so a unit made today may sit a shade apart from a panel installed years ago. What we can do is confirm the closest match with you before fabrication begins, so you decide with your eyes open. On most homes the closest option is very close indeed — but you will hear the caveat from us before you commit, not after.
Renting a new-build? Still reversible
A good share of Mina Al Arab’s and Al Hamra’s newer homes are tenanted, and the replacement-unit route is as rental-friendly as any we offer. Your landlord’s original unit is stored, untouched, for the whole tenancy, and swapped back in about 30 minutes at move-out, so no landlord NOC is needed and the hand-back inspection finds the original glass in place.
That reversibility comes free with the method — it is not an upgrade or an extra. It is simply what happens when the original unit is treated as something to preserve rather than something to cut.
Frequently asked questions
Can you cut a hole in my existing double-glazed unit?
No — and nobody can, safely. Tempered glass cannot be cut once it is made. The flap goes into a new factory-made unit with the opening formed before tempering, and your original unit is stored.
Will the new unit match my reflective glass exactly?
We offer the closest matching options, but an exact shade cannot be guaranteed 100% across different original suppliers and batches. We confirm the closest match with you before anything is fabricated.
How long does the whole process take?
It runs on the scheduled weekly route: photographs, a measurement visit, fabrication of the sealed unit, then the fitting visit. Send your photos in good time and we will confirm the schedule before you commit.
What sizes of pet can a double-glazed panel take?
The full range, from cat flaps — with a Large size for any cat over 4 kg — up to X-Large dog doors at 36×65 cm for breeds such as Labradors and Huskies. The unit is built around the flap your pet needs.
Does the replacement unit keep my home insulated?
Yes. It is a sealed double-glazed unit like the one it replaces, with the flap closing behind your pet after every pass, so the door performs as a glazed door should.
A pet door for your new-build glass
For a double glazed pet door Ras Al Khaimah new homes can take without harming their existing units, send us photographs of your door on WhatsApp at +971 52 443 2655, or email admin@petdoorfix.com. We will confirm the route and the shade options honestly, and book your measurement on the next scheduled Ras Al Khaimah visit.
Instant WhatsApp Photo Quote
Send a photo of your door, your pet's size, and your area.
WhatsApp Photo QuoteNext guide: Choosing a Pet Door Installer in Ras Al Khaimah
